Mark ceiling levels carefully. Take into consideration the thickness of Gypsum board & install the perimeter wall angles.

Mark the position of eyelet pins on the ceiling, making sure that the 'C' channel at wall ends, is not more than 300 to 450 mm away from the wall. Install Eyelet pins/cleats by automatic guns.

Install hanger rods, adjustable clips & channel      brackets. 

Install 'C' Channels @ 1200 center to center.

Install Furring Channel at 600 MM center to center &secure it by installing wire connecting clip to hold the 'c' channel and furring channel together. 

Fix the wire connecting clip to hold the 'C' channel and furring channel together.

Install the Gypsum board from below with the help of screw guns and good quality drywall screws.

Note for specific applications supports should be designed suitably.

SCHEMATIC DIAGRAM

THE SYSTEM CONSISTS OF..

SUSPENDED CEILING & SUPPORT SYSTEM     

Floor Drains | Roof Drains | Cockroach Trap | Stainless Steel Gratings | Nuts & Bolts |
Self Tapping Screws | Fasteners | Fully Threaded Rods | Pipe Clamps |  Fischers
Home | Contact us